SA-2 Diary 2 — First change: 100k plate / 470k screen

Posted by:

|

On:

|

,

Changed the 6AN8 pentode resistors to 100k ohm plate and 470k ohm screen to bring the plate up. It worked — too well. At the SA-2’s actual driver B+ of 300V, the plate now looks to land around 180–195V, well above the roughly 92–110V window the cathodyne triode wants at its grid. The splitter gets squeezed when its input sits that high. Lesson recorded: at 300V B+ this stage wants a bigger plate resistor than the usual examples suggest.