
EL84 / 7189 — one page covering both tubes: the EL84/6BQ5 and its up-rated premium relative, the 7189 (and 7189A). Researched 2026-11-17. Every fact is followed by its source. Datasheet/manufacturer facts are separated from retailer claims and forum opinion.
EL84 / 6BQ5
Origin (museum + secondary)
- r-type: “The EL84 output pentode was introduced by Mullard in 1954… first introduced in 1953”; sensibly equivalent to 6BQ5, 6P15, CV2975, N709; the Mullard 5-10 amplifier design used it; an ultra-linear push-pull pair gives 10 W at 0.9% THD; envelope 20 mm × 70 mm excluding B9A pins. http://www.r-type.org/exhib/aaa0028.htm
- r-type 6BQ5 page: “The 6BQ5 is another designation for the Mullard designed output pentode EL84,” first introduced 1953. http://www.r-type.org/exhib/aam0056.htm — N709 was M-OV’s offering of the same 12 W design, both designations on the glass. http://www.r-type.org/exhib/acp0035.htm
- Wikipedia (secondary): developed by Philips in 1953; Philips designed it to eliminate the need for a driver tube in radios (unusually high sensitivity for a power pentode); still made in Russia (Sovtek, Electro-Harmonix, Tung-Sol, Mullard, Genalex Gold Lion brands), Slovakia (JJ Electronic, Čadca) and China (Psvane). https://en.wikipedia.org/wiki/EL84

EL84 datasheet block
- Pinout (B9A, r-type): 1=ic, 2=g1, 3=k+g3, 4=h, 5=h, 6=ic, 7=a, 8=ic, 9=g2. http://www.r-type.org/exhib/aaa0028.htm
- Heater 6.3 V / 0.76 A. Typical point: Va 250 V, Vs 250 V, Vg1 −7.3 V, Ia 48 mA, Ig2 5.5 mA, gm 11.3 mA/V. (r-type’s table prints gm 6.7 — inconsistent with manufacturer-style sheets; 11.3 mA/V is the correct datasheet figure. r-type also lists Pdiss 12 W.) http://www.r-type.org/exhib/aaa0028.htm ; https://cdn.mediavalet.com/aunsw/musictribe/43hifhhPM0C6Ljjlz7XxTA/6m8P3Sr8jkOLYbFu1WKBnQ/Original/COOLAUDIO_EL84_DATASHEET.pdf
- Max ratings (manufacturer-style datasheet, CoolAudio/Bugera EL84 sheet): plate voltage 300 V working (a 500 V figure on that sheet is a cold/cutoff rating — do not quote it as an operating limit), plate dissipation 12 W, grid-2 voltage 300 V, grid-2 dissipation 2 W, heater-cathode ±100 V; input capacitance 10.8 pF, output 6.5 pF; μ(g1–g2) 19 (the meaningful “mu” for a pentode). Same PDF. Swell Amps’ bench summary of the Mullard sheet agrees: plate 300 V, screen 300 V, Pa 12 W, Pg2 2 W. https://bench.swellamps.com/power-load-line/el84/
- Single-ended Class A: 250 V supply, 5.7 W at 10% THD into 5,200 Ω (Philips characteristics, via Wikipedia); the CoolAudio sheet’s Class A1 table at Ua 250 V gives Ia(0) 48 mA and 4.5–6.0 W depending on drive. URLs above.
- Push-pull: Class AB1 at 300 V: 17 W at ~4% THD into 4+4 kΩ; at 250 V: 11 W. Triode-connected PP: 3.4 W (250 V) / 5.2 W (300 V). CoolAudio sheet above; VTV Issue 8 (Eric Barbour, 1997) agrees: “at 300 V capable of 17 W at 4% distortion in Class AB PP pairs; 5.7 W SE at 10% THD.” https://www.worldradiohistory.com/hd2/IDX-Audio/Vacuum-Tube-Valley-IDX/IDX/Vacuum-Tube-Valley-08-OCR-Page-0003.pdf
- Plate resistance ~38 kΩ nominal (secondary/seller data — approximate). https://picclick.it/EL84-6BQ5-Mullard-usato-codice-Blackburn-rx1-test-205818435192.html
EL84 audio history and uses
- Guitar: Vox AC15/AC30 and the Marshall 18 W combo defined the EL84 guitar sound of the British Invasion era (secondary). https://tcguitar.com/tubes/6v6-vs-el84/ ; https://en.wikipedia.org/wiki/EL84
- Heathkit SA-2: stereo integrated, 14 W/channel (seller/restoration listing), tube complement 2×12AX7, 2×6AU6, 2×6AN8, 4×EL84/6BQ5, 1×GZ34; ultralinear; all four outputs share one bias network (needs a matched quad). https://www.usaudiomart.com/details/649143997-heathkit-sa2-stereo-el84-tube-integrated-amplifier-totally-restored/
- Forum (Audio Asylum, Eli Duttman): the SA-2’s B+ rail runs EL84s hard; he recommends the Russian 6P14P-EV (EL84M) as “a genuine 7189 equivalent” for it. https://db.audioasylum.com/mhtml/m.html?forum=tubes&n=263681&highlight=thiels&search_url=%2Fcgi%2Fsearch.mpl%3Fforum%3DALL%26searchtext%3Dedcor
- Scott 222 family (FarMedia HH Scott chart): 222(A) and 222-B used 6BQ5 outputs (15 WPC); 222-C and 222-D moved to 7189/EL-84 (24 WPC) — see 7189 below. https://farmedia.com/home/hh-scott-vacuum-tube-audio/

EL84 equivalents / variants
- 6BQ5 (identical, RETMA designation), N709, CV2975 (r-type, above).
- E84L (7320): long-life professional version, >10,000 h (Wikipedia). Soviet 6P14P (Reflektor) directly equivalent; extended-ratings 6P14P-EV = “EL84M.” https://en.wikipedia.org/wiki/EL84
- Modern production: JJ (Slovakia), Sovtek/Electro-Harmonix/Tung-Sol reissues (Russia), Psvane (China) — Wikipedia, above.
EL84 buying notes (indicative)
- Tube-Town (retailer): JJ EL84 pair €32.90 / quad €65.80; EH EL84 quad €77.80; Sovtek pair €32.90 / quad €64.90; Tung-Sol EL84 reissue pair €51.60 / quad €103.20. https://www.tubetown.net/ttstore/en/tubes/powertubes/el84-6bq5/
- tubes4hifi (US): JJ quad $80, EH quad $99, Tung-Sol quad $125. http://www.tubes4hifi.com/tubes.htm
- NOS Mullard EL84: $50–$150+ each (secondary/blog claim — treat as a range to verify per listing). https://tcguitar.com/tubes/6v6-vs-el84/
EL84 photos
Verified direct URLs — Tube-Town, fetched live 2026-11-17. Page for all three: https://www.tubetown.net/ttstore/en/tubes/powertubes/el84-6bq5/ (tubetown.net)
- https://www.tubetown.net/ttstore/images/product_images/thumbnail_images/ehel84-4.webp — Electro-Harmonix EL84 matched quad.
- https://www.tubetown.net/ttstore/images/product_images/thumbnail_images/jjel84-pair.webp — JJ EL84 matched pair.
- https://www.tubetown.net/ttstore/images/product_images/thumbnail_images/ts6bq5-2x.webp — Tung-Sol EL84/6BQ5 pair.
EL84 could not verify
- First-introduction year to a single figure: Philips development 1953 vs Mullard launch 1954 (both appear on the r-type page itself).
- r-type’s gm 6.7 mA/V table entry (conflicts with 11.3 mA/V everywhere else — treated here as a table error).
7189 / 7189A
What it is (manufacturer copy + ratings)
- Tung-Sol (manufacturer copy on the reissue product page): “In 1959 Tung-Sol developed a premium, up-rated version of the 6BQ5/EL84 for use in industrial and military circuits… became a favorite power tube for medium power stereo amplifiers and receivers made by H. H. Scott, Sherwood, Fisher, Lafayette… also used in high-end guitar amplifiers manufactured by Magnatone. Original 7189 production ceased in the early 1980s.” https://www.amplifiedparts.com/products/7189-tung-sol-reissue-matched-vacuum-tube
- Tung-Sol reissue 7189 ratings (same page, fetched live 2026-11-17): Noval base; max plate voltage 400 V, max plate dissipation 12 W, max grid-2 voltage 300 V, max grid-2 dissipation 2.0 W zero-signal / 4.0 W max-signal, max cathode current 65 mA, max heater-cathode 100 V; input cap 10.8 pF, output 6.5 pF.
How it differs from EL84 — and the manufacturer disagreement
- Comparison table (TDSL figures as quoted in forum): EL84 VpMax 300, Vg2Max 300, PaMax 12, Pg2Max 2; 7189 VpMax 400, Vg2Max 300, PaMax 12, Pg2Max 2; 7189A VpMax 440, Vg2Max 400, PaMax 13.2, Pg2Max 2.2. https://www.18watt.com/viewtopic.php?t=96
- VTV Issue 8 (Barbour) agrees: EL84 12 W/300 V/300 V; 7189 12 W/400 V/300 V; 7189A 13.2 W/440 V/400 V; gm 11,300 µS for all three. VTV adds that the original 6BQ5 was a true pentode while the 7189 was a beam tetrode intended as an exact plug-in replacement with higher ratings; the 7189A followed in 1960; “Some later amps, such as the Scott 299B, were designed for such voltages… a good-quality EL84 might work in a 299B, it really requires a beam-type 7189.” https://www.flurrydynelabs.com/Books/Vacuum-Tube-Valley/Vacuum-Tube-Valley-Issue-08.pdf
- Flag — makers disagree: a diyAudio post summarizing the manuals notes Sylvania shows 7189 and 7189A as the same tube with different pinouts at 13.2 W / 440 V plate / 330 V screen; Tung-Sol shows 400 V / 300 V / 12 W for one version; GE shows 7189 at 440 V plate / 300 V screen and 7189A at 440 V / 400 V, 12 W, different pinouts. https://www.diyaudio.com/community/threads/am-i-going-to-blow-up-my-7189s.166741/
- Flag — “Preferred Series 7189” datasheet: TheTubeStore’s Preferred Series 7189 is a selected NOS Russian 6P14P-EV, and its datasheet PDF ratings (plate 440 V, screen 400 V, Pa 14 W, Pg2 2.2 W; PP Class AB1 at 400 V → 24 W; UL PP at 375 V → 16.5 W) are the Russian tube’s ratings, not the original US 7189’s. https://www.thetubestore.com/lib/thetubestore/Preferred-Series-7189-Data-Sheet.pdf?srsltid=AfmBOoq8FY9FeASycL-yjuDEyqTFRAtVbv2mVs7yth7vkvqoH30p7X9Z
Pinout difference (7189A) — well corroborated
- EL84/6BQ5 and 7189 share basing 9CV: 2=g1, 3=k+g3, 4&5=heater, 7=plate, 9=g2; pins 1, 6, 8 are IC (internal connection — never use as tie points).
- 7189A (basing 9LE) additionally jumpers pin 1 to pin 2 (g1) and pin 6 to pin 9 (g2/screen) internally. Sources: https://BustedGear.com/res_Tube_7189.htm ; https://music-electronics-forum.com/forum/amplification/tubes-valves/10145-caveat-on-using-6bq5-s-in-modern-el84-amps?p=159201 ; https://www.lespaulforum.com/index.php?threads%2Fpaging-jeff-west-7189-a-tube-question.181590%2F
- Practical consequence (BustedGear): some vintage Magnatone amps wired screen voltage to pin 6 on one socket and pin 9 on the other, relying on the 7189A’s internal 6–9 jumper; rewiring sockets (pin 1 wires → pin 2, pin 6 wires → pin 9) makes them accept any family member.
7189 substitution guidance
- Direction matters (secondary tube guide): “Usually you can use a 7189 in place of a 6BQ5, but NOT the other way around!” https://m.review33.com/forum_msg.php?db=1&tstart=0&s=&topic=23040110092333&start=19895&sort=0&number=26909 (that page garbles which rating is 440 vs 400 — cite it only for the substitution direction).
- Scott 222-C/D and 299(A)/299-B specified 7189/EL-84 (24 and 21 WPC). https://farmedia.com/home/hh-scott-vacuum-tube-audio/
- Klipsch forum (tech advice): EL84s cannot always substitute for 7189s; a 222C may run EL84s hard → premature failure; Russian EL84M (6P14P-EV) recommended; lowering bias extends life. https://community.klipsch.com/topic/91445-can-you-safely-use-el84s-instead-of-7189s-in-a-scott-222c/?do=findComment&comment=994046
- Audiogon forum: use 7189 instead of standard EL84 in the Eico HF-81 and similar; “Avoid the 7189A as it has a different pinout than the EL84 and 7189.” https://forum.audiogon.com/discussions/change-el84-tubes-on-eico-hf-81/post?postid=811151
- 6P14P-EV as the modern substitute: seller-translated datasheet data — max anode dissipation 14 W, gm 11.3 mA/V, triode gain ~20, internal resistance 30 kΩ, heater 6.3 V / 760 mA, guaranteed life >5,000 h (EV = increased reliability + long life); its 300 V nominal anode limit rises to 400 V at <8 W dissipation / 500 V at cutoff per a forum translation of the Russian sheet. https://picclick.com/TESTED-6P14P-EV-7189-6BQ5-EL84M-1979-PCS-1-315428823762.html — Case study: ordinary Sovtek EL84s red-plated and failed at 436 V plates in a Mesa .50 Caliber; a 6P14P-EV quartet fixed it. https://music-electronics-forum.com/forum/amplification/guitar-amps/maintenance-troubleshooting-repair/22019-mesa-50-caliber-with-red-plates
- Retailer comparison (Evatco): Tung-Sol 7189 max plate 400 V / 12 W; Sovtek EL84M (= 6P14P-EV) claimed 450–500 V / 14 W (retailer claim — treat cautiously); JJ EL84 300 V / 12 W. Guidance: with a 380–420 V plate supply, select true 7189 variants. https://www.evatco.com.au/el84-6bq5-7189-differences/
7189 buying notes (indicative)
- Tung-Sol reissue 7189 (Amplified Parts, fetched live): single $43.75, matched pair $90.50, matched quad $181.00, in stock. https://www.amplifiedparts.com/products/7189-tung-sol-reissue-matched-vacuum-tube — Tube-Town pair €73.90. https://www.tubetown.net/ttstore/en/tung-sol-7189-el84-reissue-high-quality-pair.html
- Sovtek EL84M matched pair ~$86.59; NOS Amperex 7189 matched pair $125.00; 6P14P-EV matched pair ~$33–34 (PicClick). https://picclick.com/7189-Tung-Sol-Reissue-Matched-Vacuum-Tube-Matched-Quad-126672753008.html
7189 photos
Verified direct URLs — Amplified Parts, fetched live 2026-11-17. Page: https://www.amplifiedparts.com/products/7189-tung-sol-reissue-matched-vacuum-tube (amplifiedparts.com)
- https://www.amplifiedparts.com/sites/default/files/styles/uc_product/public/uc_products/t-7189-tung_dpm_0.png?itok=PDp0O0CP — single Tung-Sol reissue 7189.
- https://www.amplifiedparts.com/sites/default/files/styles/uc_product/public/uc_products/t-7189-tung-mp_0.png?itok=vndkuRIo — matched pair.
- https://www.amplifiedparts.com/sites/default/files/styles/uc_product/public/uc_products/t-7189-tung_new_2_bgd_ss_1.png?itok=_Qb-1XMV — tube with box.
7189 could not verify
- A single canonical “7189A datasheet” — GE/Sylvania/Tung-Sol published differing ratings (see flag above); the 440 V / 400 V / 13.2 W set is TDSL/VTV consensus, not one manufacturer’s sheet read directly.
- The claim that all 7189s are beam tetrodes rests on VTV (secondary).
Eric’s Experience
Eric will add his own bench experience here.