5847

📷 A photo from my own collection will go here.

5847 (= 404A) — a miniature pentode for high-gain amplifiers at high and ultra-high frequencies. Researched 2026-11-17. Every fact is followed by its source. Datasheet/manufacturer facts are separated from retailer claims and forum opinion.

What it is (Western Electric datasheet — primary source)

Datasheet block (WE sheet; OCR is rough — numbers presented carefully)

  • Heater 6.3 V AC/DC, 300 mA.
  • Max ratings (design center): plate voltage 180 V; screen-grid voltage 150 V; plate dissipation 3 W; screen dissipation 0.75 W; cathode current 35 mA; heater-cathode voltage 50 V; grid resistance 0.1 MΩ; bulb temperature 120 °C.
  • Operating conditions: plate supply 150 or 160 V; screen supply 150 or 160 V; plate current 13 mA; screen current ~4.5 mA (OCR-ambiguous); cathode resistor 110 Ω in one column (a 600 Ω column also appears — flag); transconductance 12,500 µmhos = 12.5 mA/V. Capacitances: input 7.1 pF, output 2.9 pF, grid-plate ~0.0x pF (OCR garbled).
  • Pinout: NOT verified pin-by-pin — see could-not-verify. It is B9A, and its pinout differs from the E180F’s (forum note below).

Equivalents and near-relatives — the D3a/7788 question, answered carefully

Audio uses

Buying notes (indicative)

Photos

Verified direct URLs — Tube World Express, fetched live 2026-11-17. Page: https://tubeworldexpress.com/collections/preamp/404a (tubeworldexpress.com)

Could not verify

  • Pinout pin-by-pin — the basing diagram in the WE/RCA sheets would not OCR to readable text; do not print a pinout for the 5847 until a clean datasheet scan is checked.
  • Plate resistance (ra) — not legible in the WE sheet OCR. (The “~2.4 kΩ triode rp” figure circulating in forums belongs to the E180F class, not the 5847.)
  • A canonical published phono-stage design using the 5847 — documented audio use is driver duty in DIY SE amplifiers plus seller positioning; no schematic-level phono design was located.
  • Exact screen current (OCR ambiguous between columns).

Eric’s Experience

Eric will add his own bench experience here.