Author: admin
-
226 Tube Pre Amplifier — The 26 Story (Web Research)
Fourth project in the diary: a preamplifier built around the type 226 tube. This is the oldest glass in the diary by far. The tube The UX-226 — also marked 26, and by Cunningham as CX-326 — was announced in September 1927 by RCA/Westinghouse. It is a directly heated triode: the filament is the cathode.… Read more
-
CV-345 Single Ended — What Is a CV345? (Web Research)
Third project in the diary: a single-ended amplifier built around the CV345. First question: what is a CV345? The tube CV stands for “Common Valve” — the British military numbering system, not “Commonwealth Valve”. CV345 is the military number for the 12E1, a beam tetrode introduced in 1946. It was designed as a series-pass valve… Read more
-
Scott 222A — The Complete Story (Web Research)
Second project in the diary: the H.H. Scott 222A. Here is what the web knows about it. What it is A stereo integrated amplifier from H.H. Scott Inc. of Maynard, Massachusetts, made in 1959–1960. Scott’s own 1959 ad calls it the “new H.H. Scott 24 watt stereophonic amplifier, Model 222” and lists it at $139.95.… Read more
-
Heathkit SA-2 — The Complete Story (Web Research)
Before I took mine apart, I went looking for everything the web knows about the Heathkit SA-2. Here is the summary. What it is The SA-2 is a stereo integrated amplifier/preamplifier kit from the Heath Company of Benton Harbor, Michigan. It was advertised as new in January 1960 at a kit price of $52.95. In… Read more
-
SA-2 Reference — The factory schematic
Added the factory schematic to the project file — this is the reference for everything in this diary. The whole amp on one page: 12AX7 phono/input stages, 6AU6 pentodes (V3/V4), the 6AN8 driver (V5/V6) and EL84 push-pull outputs, GZ34/5AR4 rectifier. The numbers that matter for the driver work: Heathkit’s voltage chart shows the 6AN8 pentode… Read more
-
SA-2 Diary 3 — The corrected pick: 180k plate, target pin 6 at 92–110V
Working the numbers again for 300V B+: keep the 470k ohm screen resistor, change the plate resistor to 180k ohm. Expected result: about 111V at pin 6 (the pentode plate / triode grid), right at the top of the 92–110V target window. Screen bypass capacitor for the 470k screen resistor: 2.2–4.7 uF, rated for full… Read more
-
SA-2 Diary 2 — First change: 100k plate / 470k screen
Changed the 6AN8 pentode resistors to 100k ohm plate and 470k ohm screen to bring the plate up. It worked — too well. At the SA-2’s actual driver B+ of 300V, the plate now looks to land around 180–195V, well above the roughly 92–110V window the cathodyne triode wants at its grid. The splitter gets… Read more
-
SA-2 Diary 1 — Starting point: the original 6AN8 driver values
The SA-2 came with the stock Heathkit driver values for the 6AN8 pentode section: 220k ohm plate resistor and 680k ohm screen resistor. Problem: the pentode plate voltage sits too low. Because the pentode plate is direct-coupled to the triode cathodyne splitter’s grid, a low plate voltage starves the splitter. First entry in the diary… Read more