SA-2 Diary 3 — The corrected pick: 180k plate, target pin 6 at 92–110V

Posted by:

|

On:

|

,

Working the numbers again for 300V B+: keep the 470k ohm screen resistor, change the plate resistor to 180k ohm. Expected result: about 111V at pin 6 (the pentode plate / triode grid), right at the top of the 92–110V target window. Screen bypass capacitor for the 470k screen resistor: 2.2–4.7 uF, rated for full B+, mounted close to the socket with short leads. Next step: measure pin 6 with the 100k still in place — that real reading decides whether 180k goes in. To be continued.