5998

📷 A photo from my own collection will go here.

5998 / WE 421A — a double triode built as a series-pass regulator tube. Researched 2026-11-17. Facts below are from the research report for this page; where the report flagged a conflict, the flag is kept.

What it is

  • Double triode with separate indirectly heated cathodes — a series-pass regulator tube, per the Western Electric 421A sheet (Bell System Practices AB46.421A, October 1953).
  • Heater 6.3 V / 2.4 A. Bulb ST-16. Medium 8-pin octal base.
  • Pinout: NOT printed here — the pin drawing in the WE sheet did not OCR, so no pinout is given until a clean datasheet scan is checked.

Datasheet block

  • Maximum ratings per triode: plate voltage 250 V, plate dissipation 13 W, cathode current 125 mA.
  • Operating: plate current 125 mA, amplification factor mu 5.9–6.1, plate resistance rp ~305–330 Ω, transconductance gm 18–20 mA/V.

421A vs 5998 — and the 5998A

  • 421A is Western Electric’s number for the 5998 design, but the sheets differ — a forum tabulation of the two sheets shows 421A vs 5998 plate current, gm, voltage and dissipation differing; treat that comparison as datasheet-derived but forum-presented.
  • 5998A and 7236 are uprated versions — “5998A is NOT the 5998.”

Relatives — not identical

  • Related to, but NOT identical to, the 6AS7G / 6080: the 5998 has about 2.7× the mu and about 2.2× the gm of the 6AS7G/6080 family, so it is not a drop-in equivalent.

Audio uses

  • The 5998 is the classic upgrade tube for the Bottlehead Crack OTL headphone amplifier, and for OTL single-ended use — its low plate resistance and high transconductance suit output-transformerless circuits.

Could not verify

  • Pinout — the WE sheet pin drawing did not OCR; do not print a pinout for the 5998 until a clean datasheet scan is checked.
  • The 421A-vs-5998 sheet differences rest on a forum tabulation, not on two sheets read side by side in this run.

Eric’s Experience

Eric will add his own bench experience here.