6EH7

Two EF183 vacuum tubes, the European twin of the 6EH7
The EF183 — the European twin of the 6EH7. Photo: Wikimedia Commons.

6EH7 / EF183 — a high-gain variable-mu frame-grid RF pentode, a late-1950s design. Researched 2026-11-17. Every fact is followed by its source. Datasheet/manufacturer facts are separated from retailer claims and forum opinion.

History and intended use

  • High-gain variable-mu frame-grid RF pentode; late-1950s design, first introduced 1959, superseded the EF85. Mullard (1959): “frame-grid variable-mu RF pentode for use as an automatic gain controlled IF amplifier in television receivers”; performance figures at 40 MHz (normal TV IF ~33 MHz); same pin connections as EF80/EF85/EF184; envelope 20 mm × 53 mm, B9A. http://www.r-type.org/exhib/aai0110.htm
  • The 6EH7 page gives the same story (frame-grid, introduced 1960) and the same typical table. http://r-type.org/exhib/aaa1788.htm

Datasheet block (RCA manufacturer datasheet + r-type)

  • RCA type description: “Semiremote-Cutoff Pentode,” 9-pin miniature, basing 9AQ. https://minio-l0g80wsg8o8okws8c4gc0cog.91.99.12.107.sslip.io/tubedatabase/6EH7.pdf
  • Heater 6.3 ±0.6 V / 0.300 A; peak heater-cathode ±150 V; capacitances Cg1 ~9 pF, plate ~3 pF, g1–plate 0.005 pF max. Same RCA sheet.
  • Class A typical point: Va 200 V, Vg2 90 V, Vg1 −2 V, rp ~0.5 MΩ, gm 12,500 µmhos (12.5 mA/V), Ia 12 mA, Ig2 4.5 mA. Same RCA sheet; r-type’s table agrees. http://www.r-type.org/exhib/aai0110.htm
  • Max ratings (design-center, RCA): plate 250 V max (plate supply 550 V max), Vg2 250 V max, cathode current 20 mA max, Pg2 0.65 W max, Pa 2.5 W max. RCA sheet above.
  • Gain-control behaviour (RCA): with a 200 V screen supply through 22 kΩ, gm falls from 12,500 µmhos at Vg1 −2 V to 1,250 at −6.5 V, 625 at −9.5 V and 125 at −19.5 V. RCA sheet above. (BTB’s retailer summary gives the same curve with a 27 kΩ screen resistor — resistor value differs between the two sources; the shape does not.) https://btb-elektronik.de/en/ef183-6eh7-pentode/ef183
  • Pinout (RCA, confirmed by BTB): 1=k, 2=g1, 3=k, 4=h, 5=h, 6=internal shield, 7=plate, 8=g2, 9=g3. RCA sheet and BTB page above.

Difference from EF184/6EJ7 (the core point)

  • EF183/6EH7 is variable-mu (RCA: semiremote cutoff): gain falls progressively as g1 goes more negative, which is what AGC needs. EF184/6EJ7 is the sharp-cutoff (“straight”) companion. r-type’s “Valves and their Habits”: “The EF183 is variable μ and the EF184 is straight.” http://www.r-type.org/articles/art-012.htm
  • Same B9A pinout and heater, but different typical operating points: EF184 runs Vg2 at ~200 V with gm 15–15.6 mA/V; EF183 runs Vg2 at 90 V with gm 12.5 mA/V. Sources above.
  • Retailer warning (BTB): the EF184 “is a sharp-cutoff pentode and does not provide the same gain-control characteristic… not an equivalent replacement in compressor or variable-gain circuits.” https://btb-elektronik.de/en/ef183-6eh7-pentode/ef183

Equivalents

Audio / DIY use

Buying notes (indicative)

Photos

Direct image URLs could not be verified (see could-not-verify). Photo-bearing pages: the r-type EF183 exhibit (multiple photos: whole valve, internal structure, microscope grid image — full size behind the museum paywall) http://www.r-type.org/exhib/aai0110.htm ; CV5831 exhibit http://www.r-type.org/exhib/acl0561.htm ; Computer History Museum catalog entry for two GE 6EH7 tubes (lists a still image) https://www.computerhistory.org/collections/catalog/102731070

Could not verify

  • Direct (hotlinkable) photo URLs — r-type’s are paywalled and no seller page yielded an extractable image file.
  • Any well-documented commercial audio product using the EF183 — audio use found is DIY/retailer-led only.
  • A pentode “mu” figure (not a meaningful datasheet parameter for this type; the gain-control gm curve above is the relevant data).

Eric’s Experience

Eric will add his own bench experience here.